manualshive.com logo in svg

Clevo N1X0SD, User Manual, Page: 145 / 336

Share
Download
Clevo N1X0SD User Manual Download Page 145

BIOS Utilities

Boot Menu 5 - 15

5

Boot Option Priorities (Boot Menu)

Press Enter to select the Boot Option # and use the arrow keys to select any device
in order to move its boot priority up and down the list (the selected device will be
highlighted in white).

UEFI Boot (Boot Menu)

Enable/disable UEFI Boot from this menu. The Unified Extensible Firmware Inter-
face (UEFI) specification provides a clean interface between operating systems and
platform firmware at boot time. In contrast to BIOS, UEFI defines a set of standard
boot and runtime services. The 

Network Stack

 item will be enabled as an option un-

der UEFI Boot.

Launch CSM (Boot Menu)

Launching CSM allows for traditional operating systems, which do not support UE-
FI, to load. 

Do not Enable this item for Windows 8.1 operating systems

. 

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments