MAINTENANCE
68
T12 9009910 (3--2013)
PRIMING THE ec- H2O SYSTEM
Prime the
ec--H2O
system if the machine has
been stored for a long period with no water in the
solution tank /
ec--H2O
system.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface and turn off
machine.
1. Fill the solution tank with clean cool water.
See
FILLING THE SOLUTION TANK
section
of this manual.
2. Lift the operator seat open and engage the
seat support.
3. Remove the drain hose from the
ec--H2O
compartment.
4. Disconnect the outlet hose to the scrub head
from the
ec--H2O
manifold.
5. Place the drain hose into an empty container.
6. Connect the drain hose to the
ec--H2O
manifold hose disconnected from the outlet
hose in the previous step.
7. Place the
ec--H2O
system outlet hose into an
empty container.
8. Start the machine.
