MAINTENANCE
43
T12 9009918 (3--2013)
BATTERY WATERING SYSTEM (OPTION)
The optional battery watering system provides a
safe and easy way to maintain the proper
electrolyte levels in the batteries.
Check for the battery watering system hoses and
connections for damage or wear after every 100
hours.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
1. Lift the operator seat open and engage the
seat support.
2. Fully charge batteries prior to using the
battery watering system. Do not add water to
batteries before charging, the electrolyte level
will expand and may overflow when charging.
See
CHARGING THE BATTERIES
(OFF--BOARD CHARGER).
3. Connect the battery watering system to the
water supply.
NOTE: Water quality is important to maintain the
life of the battery. Always use water that meets
battery manufacturer requirements.
4. Ensure the gravity feed tank has enough
water to completely fill the batteries.
5. Remove the dust cover from the battery fill
tube and connect the fill regulator.
6. Observe the red indicator. The indicator stops
spinning when the batteries are full.
7. Disconnect the battery watering system from
the water supply.
8. Close the operator seat.
