MAINTENANCE
56
T12 9009910 (3--2013)
REPLACING OR ROTATING THE SIDE
BRUSH SQUEEGEE BLADES (OPTION)
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
Check the side brush squeegee blade for damage
and wear daily. Replace or rotate the blade if the
leading edge is torn or worn half-way through the
thickness of the blade.
1. Loosen the side brush squeegee assembly
handle and remove the squeegee assembly
from the machine.
2. Loosen the retaining band latch.
3. Remove the retaining band, squeegee blades,
and spacer from the squeegee frame.
NOTE: Observe which squeegee slots were
installed on the squeegee frame before removing
the squeegee.
NOTE: The squeegee blade(s) have two sets of
slots for adjusting the squeegee blade deflection.
Install / reinstall squeegees so the deflection is
approximately 12 mm
(0.50 in)
for smooth floors
and 15 mm
(0.62 in)
for rough floors.
