MAINTENANCE
63
T12 9009918 (3--2013)
7. Start the machine.
8. Press and release the
ec--H2O
module flush
switch to start the flush cycle.
NOTE: The module will automatically shut off
when the flush cycle is complete (approximately 7
minutes). The module must run the full 7--minute
cycle in order to reset the system indicator light
and alarm.
9. Pour 2 gallons (7.6 liters) of cool clean water
into the solution tank.
10. Press and release the flush switch to rinse
any remaining vinegar from the module. After
1--2 minutes, press the flush switch to turn off
the module.
11. Disconnect the drain hose from the
ec--H2O
manifold hose.
12. Reconnect the outlet hose to the the scrub
head to the
ec--H2O
manifold.
13. Place the drain hose back into the
ec--H2O
compartment.
14. Close the operator seat.
