OPERATION
23
T12 9009918 (3--2013)
SCRUBBING
FOR SAFETY: Do not operate machine, unless
operator manual is read and understood.
1. Turn on the machine.
2. Press the
1--STEP button
. The light near the
button will come on. All the preset scrubbing
functions will turn on.
T12
T12XP
3. Press the
ec--H2O button
if using optional
ec--H2O system
to scrub. The indicator light
will illuminate.
T12
T12XP
4. If necessary, adjust the brush pressure and
solution flow.
5. Place the
Directional switch
in the direction
the machine is to be moved (forward or
reverse).
6. Press the
Propel pedal
to begin scrubbing.
NOTE: DO NOT turn on the ec--H2O system
during conventional scrubbing. Conventional
cleaning detergents could cause an ec--H2O
system failure. Drain, rinse, and refill the solution
tank with cool clean water before operating the
ec--H2O system.
WARNING: Flammable materials or
reactive metals can cause an explosion
or fire. Do not pick up.
FOR SAFETY: When using machine, go slowly
on inclines and slippery surfaces.
NOTE
:
The squeegee automatically rises when
the machine is driven in reverse. This prevents
damage to the squeegee.
ec- H2O Model:
If an alarm sounds and the
warning / fault indicator indicator light flashes the
ec--H2O
module must be flushed to resume
ec--H2O
operation (See
ec--H2O MODULE
FLUSH PROCEDURE
).
NOTE: When the alarm sounds press the scrub
mode button to shut off the ec--H2O system and
continue scrubbing or flush the ec--H2O system.
ec - H2O SYSTEM
INDICATOR LIGHT
CODE
CONDITION
Solid blue indicator
light
Normal operation
Flashing red warning /
fault indicator light
Flush
ec--H2O
module
Solid red warning /
fault indicator light
Contact Service Center
7. Release the
Directional pedal
and press the
brake pedal t
o stop the machine.
8. Press the
1--STEP button
to stop scrubbing.
The light near the button will go off and
scrubbing functions will stop after a short
delay.
