CleaverBrooks profire q, Installation, Operation And Maintanance

Page: 25 / 58

750-370
ProFire Q Series Manual 2-3
Installation
FIGURE 2-2.
Burner Model/Boiler HP
2.5 — Installation
Allow enough clearance at the bottom of the burner to allow the proper air supply. Many boilers, including some Scotch
Marine types, do not have sufficiently rigid front plates and require additional support under the burner base. Boilers
operating with the combustion pressure above atmospheric pressure must be sealed to prevent escape of combustion
products into the boiler room. The burner mounting flange is designed to provide for a seal. The face of the boiler and
burner flange must be sealed with a burner flange gasket (ensure burner flange gasket is installed properly). Make sure
the dry oven and burner blast tube are concentric. For maximum safety, it is recommended that boilers not operating
under pressure should also be sealed.
Burner Model Boiler HP A (in.) B (in.)
Q6-037 9 8 20
Q6-055 13 8 24
Q6-075 18 10 24
Q6-100 25 12 24
Q6-130 30 12 36
Q6-150 36 14 36
Q8-175 42 14 48
Q8-200 50 16 48
Q8-250 60 16 48
B
A
750-00512-000