ClearSpan 106786, Manual

Page: 7 / 37

7
Revision date: 02.07.12
CLEARSPAN
™
POLY BUILDINGS
LAY OUT THE BUILDING SITE
The High Boy building frame is designed to be anchored
to the ground or to a concrete foundation. If a concrete
foundation or footing is not used, setting the base of each
rafter on treated planks or concrete pads is recommended.
If boards are used as shown above, the boards must
be staked in place to the proper width of the building
frame. The on-center frame width for this line of High
Boy buildings is 26' 3-1/2" . Consult the Quick Start Guide
diagrams for additional dimensions and details.
ATTENTION:
The frame must be anchored to the site.
Securing the frame to boards that are staked in place is
not sufficient to secure the building. Consult the Must Read
document for additional anchoring instructions.
If a concrete foundation or footing is used, the base plates
can be anchored to the foundation or footing before the
frame is assembled. Consult the Base Details diagram
in the Quick Start Guide of these instructions to properly
space and attach the base plates to the foundation.
Consult a qualified professional contractor to properly
anchor the base plates to the concrete foundation.
IMPORTANT:
Materials to anchor the frame to the site or to
secure the base plates to the foundation are not included
and must be supplied by the customer.
Frame shown above is used to illustrate setting a frame on treated
boards for support. Frame may differ from actual frame.
Space below is reserved for customer notes.
Boards and all
materials needed
to secure the
boards and base
plates in place are
supplied by the
customer.
Base plate design
may differ from
actual design.