background image

iv  

WA RR A N T Y   

 

Telephone for the Americas and Asia: 

+1.510.337.6600

 

Email: 

[email protected]

 

Once the standard warranty period has expired, the User Support 
Center will continue to provide telephone support if you have 
purchased an Extended Warranty. 

For latest contact information please refer to the Service and Support section at 
www.clearcom.com. 

 

WARRANTY REPAIRS AND RETURNS 

Before returning equipment for repair, contact a User Support Center 
to obtain a Return Material Authorization (RMA). CLEAR-COM 
representatives will give you instructions and addresses for returning 
your equipment. You must ship the equipment at your expense, and 
the support center will return the equipment at CLEAR-COM

’s 

expense. 

For out-of-box failures, use the following contact information: 

Europe, Middle East and Africa 

Tel: +44 1223 815000 Email: 

[email protected]

 

 

NON-WARRANTY REPAIRS AND RETURNS 

For items not under warranty, you must obtain an RMA by contacting 
the User Support Center.  CLEAR-COM representatives will give you 
instructions and addresses for returning your equipment. 

You must pay all charges to have the equipment shipped to the 
support center and returned to you, in addition to the costs of the 
repair. 

 

EXTENDED WARRANTY 

You can purchase an extended warranty at the time of purchase or at 
any time during the first two years of ownership of the product. The 
purchase of an extended warranty extends to five years the warranty 
of any product offered with a standard two-year warranty. The total 
warranty period will not extend beyond five years.

Note

: CLEAR-

COM does not offer warranty extensions on UHF wireless intercom 
systems, or on any product with a 1-year or 90-day warranty. 

 

LIABILITY 

THE FOREGOING WARRANTY IS CLEAR-COM'S SOLE AND 
EXCLUSIVE WARRANTY. THE IMPLIED WARRANTY OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE AND ANY OTHER REQUIRED IMPLIED WARRANTY 
SHALL EXPIRE AT THE END OF THE WARRANTY PERIOD. 
THERE ARE NO OTHER WARRANTIES (INCLUDING WITHOUT 
LIMITATION WARRANTIES FOR CONSUMABLES AND OTHER 
SUPPLIES) OF ANY NATURE WHATSOEVER, WHETHER 
ARISING IN CONTRACT, TORT, NEGLIGENCE OF ANY 
DEGREE, STRICT LIABILITY OR OTHERWISE, WITH RESPECT 
TO THE PRODUCTS OR ANY PART THEREOF DELIVERED 
HEREUNDER, OR FOR ANY DAMAGES AND/OR LOSSES 
(INCLUDING LOSS OF USE, REVENUE, AND/OR PROFITS). 
SOME STATES DO NOT ALLOW THE EXCLUSION OR 

Summary of Contents for ECLIPSE TEL-14






































Reviews: