User Guide
|
Eclipse HX-PiCo
Page 30
attention of a panel operator working in a high-noise environment such as a control
booth a relay can be programmed to switch on a light at the panel each time the
panel receives an incoming call to ensure that the call will not be missed.
Each general-purpose output has a relay inside the Eclipse HX-PiCo matrix. When a
general-purpose output is inactive, the associated common pin on the GP OUT
connector will be shorted to the relevant normally closed pin. When a general-
purpose output becomes active, the short between the common pin and the
normally closed pin is broken and a new connection is made between the
common pin and the normally open pin.
Note:
If the GP-OUT port is used the following filter must be fitted between the PROC-RCC
socket and the cable: CINCH FA-25PS/1-LF 25W D-type in-line 1000pF filter
(UK supplier: Farnell 111-4108)
Note:
A shielded cable should be used.
