User Guide
|
Eclipse HX-PiCo
Page 57
Status
information
Description
System Status
This field shows the status of any data download
from a connected PC computer operating the
EHX software. When data downloads to the
Eclipse HX-PiCo matrix from a connected PC,
either Serial Download or Ethernet
Download is displayed to indicate the type of
download. When the download ends, OK is
displayed in the System Status field.
PiCo-Link
Shows the status of the PiCo-Link, a high
capacity link for connecting two Eclipse HX-
PiCos.
When an X is displayed in the UP checkbox, the
high-speed link is connected. When an X is
displayed in the Activity checkbox, the high-
speed link is receiving information.
Local Area
Network
Shows the status of a local area network, if one
is connected. When an X is displayed in the UP
checkbox, the LAN is connected. When an X is
displayed in the Activity checkbox, the LAN is
receiving information.
Table 17: System status information
6.9
Selecting a source of Identification Tone
An Identification Tone (Ident Tone) is typically sent to destinations that require a
tone or audio statement during system setup. This feature is activated from the
Audio menu’s output level screen (see 6.3 Adjusting audio levels).
To use this feature, a source for the Identification Tone must be selected. To select
a source for the Identification Tone:
1)
From the Main menu, select System. The System menu is displayed.
2)
From the System menu, select Maintenance. The Maintenance menu is
displayed.
3)
From the Maintenance menu, select Ident Source. The Ident Source
menu is displayed.
4)
Scroll to the Source number and press the setup/enter rotary control.
