User Guide
|
Eclipse HX-PiCo
Page 59
Reset option
Description
Reset
Resets the system to the currently
selected configuration, while restoring
active calls and activating any changes
made from the Eclipse HX-PiCo’s front
panel since the last reset.
Clear Xpoints
Resets the system to the currently
selected configuration, while clearing
active calls and clearing any changes
made from the Eclipse HX-PiCo’s front
panel since the last reset.
Table 18: Reset options
5)
To exit this menu, scroll to and select Exit.
6.11
Checking the status of General Purpose Inputs
(GPIs)
It is possible to connect an external logic device (such as an external foot switch, a
panel-mounted switch, or the logic output of some other device) to the GP IN
connector on the rear panel of the Eclipse HX-PiCo.
When the external logic device is activated, it sends a control signal into the matrix
to perform one of several preset functions, such as turning an intercom panel’s
microphone on or off, muting a microphone’s output, or turning a panel’s speaker
off. The function to perform and the panel upon which it is performed is chosen
from the EHX programming software.
Note:
For more information about GPIs, see 5.3.5 Connections using general-purpose
inputs (GPI’s)
Once a GPI has been connected, you can check the on / off status of the GPI
directly from the front panel of the Eclipse HX-PiCo. To check whether or not a
general-purpose input is on:
1)
From the Main menu, select Status. The Status menu is displayed.
2)
From the Status menu, select GPI. The GPI Status menu is displayed.
