User Guide
|
Eclipse HX-PiCo
Page 50
Note:
The audio level changes in real time as the setup/enter rotary
control is rotated in the same way as adjusting the audio with a
volume control.
d)
When the desired decibel level appears in the display, press the
Setup/Enter rotary control to select and save it.
Note:
The audio level can be set between -60 dB and 18 dB in 1 dB
steps.
To adjust audio levels from the Output Level menu, scroll to the Port number:
a)
Press and release the Setup/Enter rotary control to scroll through
available ports.
Note:
When a port number appears onscreen, the port’s label (as set in
EHX), automatically appears next to it.
Press and release the setup/enter rotary control.
b)
Rotate the setup/enter rotary control clockwise or counter clockwise
to display the available port digits. When the desired port number
appears in the display, press and release the Setup/Enter rotary
control to select it.
Using the rotary control, scroll to Level. Press and release the rotary
control to select Level.
Note:
Rotate the rotary control clockwise or counter clockwise to display
available decibel level values
The audio level changes in real time as the setup/enter rotary control is rotated
in the same way as adjusting the audio with a volume control.
c)
When the desired digit appears in the display, press and release the
setup/enter rotary control to select and save it.
Note:
The audio level can be set between -60 dB and 18 dB in 1 dB
steps.
The identification tone (Ident Tone) is enabled in the OUTPUT audio levels
menu.
The identification tone is typically sent to destinations that require a tone or audio
statement during system setup.
To set the audio source for a port as the identification tone:
1)
From the OUTPUT audio levels menu, scroll to and select the Ident Tone
Enable checkbox. To turn off the identification tone, clear the checkbox.
The identification tone continues until either the Enable checkbox is cleared
or Clear Tones is selected in the Audio menu.
