OH 1301
LIFTING TABLE FOR EV/HYBRID BATTERIES AND HEAVY
COMPONENTS
Fine adjustment tilting feature
The forcing screws shown in Figure 1 allow the user to fi nely tilt the platform to help remove or
install vehicle components. This feature provides a total of two inches of tilt at the front of the
platform which helps compensate for uneven shop fl oors, diffi
cult fastener locations, etc. The
forcing screws can be operated by either hand, or wrench or socket, depending on the applied
load.
CAUTION: To prevent equipment damage, do not tilt the platform without the leveler screws in
their lowest position as the platform might be driven into the screws
Caractéristique de stabilisation
Stabilization Feature
If lift is to be used as a stationary work surface for servicing components, two leveler screws (see
Figure 2) have been added to help stabilize the platform.
When the desired tilt or platform position has been reached, thread both leveler screws inward
until they meet the bottom of the platform and tighten fi nger-tight only. This provides two extra
points of contact for a more stable platform.
CAUTION: To prevent equipment damage,
• Do not tighten the leveler screws with a wrench or ratchet.
• Do not tilt the platform if the leveler screws are not in their lowest position.
INSTRUCTION
Figure 1
Summary of Contents for OH 1301
