CLAS OH 1301, Manual

Page: 16 / 28

OH 1301
LIFTING TABLE FOR EV/HYBRID BATTERIES AND HEAVY
COMPONENTS
SAFETY PRECAUTIONS
WARNING: To prevent personal injury or equipment damage,
• Study, understand, and follow all instructions before operating this device.
• Wear eye protection that meets OSHA and ANSI Z87.1 standards.
• Only qualifi ed personnel shall perform inspections and repairs to this lift.
• Before using lift, inspect the lift for bends, cracks, dents, elongated holes, or missing
hardware. If damage is found, discontinue use.
• Use only those repair parts called out in the parts list in this document. Items found
in the parts list have been carefully tested and selected.
• Do not exceed the rated capacity of lift or platform extension.
• Do not raise or lower lift with platform extended.
• Use only on a hard, level surface.
• Do not raise or move a load having a center of gravity extending beyond the wheels.
Tipping can result in personal injury.
• Do not move lift while a load is raised. Carefully and slowly move the load on inclines
or around corners. Tipping can result in personal injury. Lower load completely before
storage.
• Do not stand under a load supported by the lift.
• Secure component in place before removing it from the lift.
• No alterations shall be made to this product as this will void the warranty.
Pump
• Do not exceed the hydraulic pressure rating noted on the pump data plate or tamper with
the internal high pressure relief valve. Creating pressure beyond the rated pressure can result in
personal injury.
• Before replenishing the fl uid level, retract the system to prevent overfi lling the pump reservoir.
An overfi ll can cause personal injury due to excess reservoir pressure created when cylinders are
retracted