11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPENING THE SIDE PANEL
IMPORTANT: Make sure that the
welder is not connected to the mains
supply.
1. Push the latches down and let the
side panel drop down.
2. Remove loose items that have
been transported inside.
UNPACKING
Any damage or deficiency should be reported to your CLARKE dealer
immediately.
Some of the components are stored within the machine side
compartment.
The components include the following:
WARNING: DO NOT OPERATE THIS MACHINE WITH THE SIDE PANEL
OPENED OR REMOVED.
1 x MIG TORCH Euro connection Torch (Quick release)
1 x 0.8mm tip for no gas welding in the torch
1 x 0.9mm tip (loose)
1 x hammer brush
1 x 0.6mm tip (loose)
1 x torch neck
1 x 0.8mm tip (loose)
1 x torch shroud
1 x 1.0mm tip (loose)
1 x gas bottle bracket
1 x welding shield
1 x chain
Summary of Contents for MIG 240
Page 28: ......
