13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
THE WELDING SHIELD
1. Push the two halves of the shield
together as shown, making sure
the hooks and pins on the side
engage correctly.
2. Place the handle into position
and secure using the plastic nut
provided.
3. Insert the clear glass panel into
the recess inside the shield,
followed by the dark glass panel.
• The clear glass must be inserted
first.
4. Insert the two plastic screws to
clamp the glass panels from the
inside of the shield.
5. Replace the clear glass panel when it becomes badly pitted.
CAUTION: WHEN REPLACING THE GLASS PANELS, ONLY USE PARTS
SUPPLIED BY CLARKE INTERNATIONAL. THE DARK PANEL IS A CERTIFIED,
SPECIFIC OPTICAL CLASS AND SHOULD NOT BE EXCHANGED FOR ANY
OTHER TYPE.
Summary of Contents for MIG 240
Page 28: ......
