Clarke ENCORE MAX, Operator'S Manual & Parts List, Page: 46 / 61

1-46 CLARKE
ENCORE MAX
PLUG
TO DRAIN SOLUTION TANK
Remove the cover from the solution tank, rotate the handle on the drain plug counterclockwise and then pull up
as shown in figure 61. After the tank has drained, flush out with clean water and reinstall the plug.
Fig. 61
SQUEEGEE CLAMP
SQUEEGEE BLADE REPLACEMENT
Replace if front or rear blades are worn or damaged.
1. Set the parking brake.
2. Turn the key to the on position.
3. Put the Squeegee Blade Switch in the lower position.
4. Turn the key switch to the off position.
5. Remove the rear squeegee assembly.
6. Loosen the strap clamp.
7. Remove the old blades.
Push the new blades in until they are against the top of the squeegee. Retighten clamp
Fig. 60
MAINTENANCE