Clarke ENCORE MAX, Operator'S Manual & Parts List, Page: 23 / 61

CLARKE 1-23
ENCORE MAX
BRUSH SWITCH
SCRUB
PRESSURE
SWITCH
SCRUB BRUSH SWITCH
The scrub brush switch is located on the left side of the console to right of the solution control knob as shown
in figure 16. Pushing the scrub brush switch to up position will raise the scrub deck to the top position, the
scrub brushes will stop rotating, the water solenoid will de-energize and solution flow will stop. Pushing the
scrub brush switch down will lower the scrub deck to the set down pressure. The squeegee will lower and the
vacuum will activate. When the scrub brush and squeegee are on, they will be displayed as shown in figure 17.
The brushes will not rotate until the foot throttle is depressed. Releasing the foot throttle will raise the scrub
deck to the top position and the brushes will stop rotating.
SCRUB PRESSURE SWITCH
The scrub pressure switch is located on the left side of the console between scrub brush switch and the
squeegee/vacuum switch as shown in figure 16. Pushing the scrub pressure switch up selects the next
highest scrub setting available, increasing pressure. Selected pressure is displayed as a bar on the LCD
control panel. Pressing the scrub pressure switch down selects the next lowest setting available, decreasing
pressure as shown in figure 17.
BATTERY STATUS
METER
DECK SCRUBBING
PRESSURE METER
SCRUB
BRUSHES ON
SOLUTION
FLOW ON
SOLUTION
FLOW
METER
SCRUBBING
DOWN
PRESSURE
CONTROLS
Fig. 16
Fig. 17