Clarke ENCORE MAX, Operator'S Manual & Parts List, Page: 19 / 61

CLARKE 1-19
ENCORE MAX
REMOVE BATTERY
FROM BOX
UNPACKING BATTERY
The batteries are shipped separately in six boxes as shown in figure 5. Open the boxes on a clean work
surface and lift out the battery as shown in figure 6.
BATTERY COMPARTMENT
SAFETY LATCH
BATTERY CONECTOR
SIDE PANNEL
BATTERY SPACER
(NARROW SIDE UP)
BATTERY SPACER
(NARROW SIDE UP
6 VOLT
LEAD ACID
BATTERY
BATTERY
CONNECTOR
WIRE
BATTERY INSTALLATION
To install batteries lift the seat cover and secure safety latch in notch. Pull up on the side panel and remove to
gain access to the battery compartment. Lower batteries
using a 1000 lb. (454 KG) lifting mechanism to lift
and install batteries into battery compartment placing battery spacers to stop from moving. Connect battery
connector wires in series to batteries as shown in figure 8.
WARNING
Do not leave charged batteries on concrete surface, they will discarge.
MACHINE PREPARATION
Fig. 6
Fig. 5
Fig. 7
Fig. 8