20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STORAGE
See the separate engine manual supplied, for information regarding the
storage procedure.
1. Drain all water from the high pressure hose, coil it and store it on the gun/
hose holder, located on the side of the power washer handle.
2. Drain all water from the spray gun and spray wand by holding the gun/
wand vertically with the nozzle pointing down, and pulling the trigger. Store
in the gun/hose holder.
3. Store all other parts so that they are protected from damage.
For long term storage, the petrol tank should be drained before the fuel
deteriorates with time. Ensure that the engine is cold before draining the tank.
Remove the fuel tank cap and use a pump type syphon to drain the petrol
into an appropriate, clean container. DO NOT store petrol for long periods of
time.
Dispose of excess petrol in an environmentally safe way, ideally by using
elsewhere. Your local recycling centre can advise you on the best method of
disposal. After the petrol tank has been drained, start the engine and allow it
to use any petrol that may remain in the engine or fuel pipe. Make sure that
the power washer has been thoroughly cleaned before storing it in a clean
dry place.
Summary of Contents for 7330362
Page 28: ......
