15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
WATER BUTT CONNECTION
This machine has the ability to draw its own water, meaning you can use water
not under pressure, such as rainwater collected in a water butt.
To do this you must carry out the following procedure.
1. Attach the filter to the end of the
pipe supplied.
2. Place the filter into the water butt.
3. Replace the fitted inlet connector
with the inlet connector supplied.
4. Connect the pick-up pipe to the
pressure washer as shown.
• Tighten securely.
5. Open the suction valve shown.
6. Start the power washer as shown
on page 11.
• Water is ejected from the
nozzle as shown.
7. When the water spray being
ejected is consistent and at high
pressure close the self suction
valve.
8. Use the pressure washer as
normal.
• DO NOT let the pressure washer
run dry.
Summary of Contents for 7330362
Page 28: ......
