16
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SHUTTING DOWN
1. After each use, if you have applied chemicals, place the chemical hose
into a container of clean water and run clean water through the chemical
injection system to flush the system thoroughly.
NOTE:
Failure to do so could cause damage to the pump.
2. Turn the engine off. See engine
owner's manual.
NOTE:
NEVER turn the water off with
the engine running.
3. Turn the water supply off.
4. Pull the trigger on the spray gun to
relieve any water pressure.
5. See storage section in this manual
for proper storage procedures.
MAINTENANCE
CHANGING THE PUMP OIL
1. Unscrew and remove the oil filler
cap.
2. Place an oil collection tray (not
supplied) under the drain plug.
3. Unscrew the drain plug, and allow
the used oil to drain from the
crankcase into the oil collection
tray.
NOTE:
Drain the oil when the engine
is warm, this will ensure the oil
flows out quicker.
CAUTION: PROLONGED EXPOSURE TO USED OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED OIL.
Summary of Contents for 7330362
Page 28: ......
