13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING THE POWER WASHER
1. Pull the trigger on the gun to start water flow.
• Stand on a stable surface and grip the gun/spray wand firmly with
both hands.
• Expect the gun to kick when the trigger is pulled.
2. Release trigger to stop the water flow.
NOTE:
The power washer will automatically go into bypass mode. In
bypass mode, the pump recirculates the water because the
trigger of the spray gun is not being pulled. If the unit is left in
bypass mode for more than two minutes, the water temperature
will rise to a dangerous level and could damage the internal
components of the pump.
ADJUSTING THE SPRAY
The nozzle is adjustable to allow you to change the spray from a narrow jet of
water to a wide spray.
TO ADJUST THE NOZZLE:
1. Hold the shaft of the lance and
twist the nozzle with the other
hand.
2. To vary the spray between narrow
and wide, turn the nozzle counter-
clockwise through a half-of-a-
turn.
WARNING: DO NOT ALLOW THE UNIT TO OPERATE IN BYPASS MODE FOR
MORE THAN TWO MINUTES AT ANY TIME.
Summary of Contents for 7330362
Page 28: ......
