9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
IMPORTANT: The engine is supplied without any oil in it and must be filled to
the correct level before use, see below.
CHECKING THE PUMP OIL LEVEL
The sight glass on the pump displays
the oil level inside.
If required, top up with oil. See
Changing the Pump Oil on page 16.
• We recommend the use of
SAE30 oil in this pump.
CHECKING ENGINE OIL LEVEL
1. Turn the oil filler cap/dipstick anti-
clockwise and remove it from the
oil filler tube. Wipe the dipstick
with a clean cloth.
2. Insert the oil filler cap/dipstick
back into the oil filler tube and
then remove it again. DO NOT
screw it in when doing this.
3. If the oil is low, fill the oil reservoir to
the edge of the oil filler hole.
• We recommend the use of
SAE30 oil in the engine.
4. Replace the oil filler cap.
WARNING: TO CARRY OUT THIS CHECK, STAND THE POWER WASHER ON
LEVEL GROUND WITH THE ENGINE OFF.
WARNING: TAKE CARE NOT TO TOUCH ANY HOT COMPONENTS WHEN
CHECKING THE OIL LEVELS.
CAUTION: RUNNING THE
ENGINE WITH INSUFFICIENT OIL
CAN CAUSE ENGINE DAMAGE.
Summary of Contents for 7330362
Page 28: ......
