7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Slide the bottle holder over the
bracket.
3. Place the bottle in the holder.
CONNECT THE WATER SUPPLY
Always follow the regulations of you local water supplier. The pressure washer
must never be connected to the drinking water supply without using a system
separator (also known as a backflow preventer) available from most
hardware stores.
NOTE:
Water that has flowed through a system separator is considered non-
drinkable.
1. Connect a water supply hose (not
supplied) to the water inlet.
NOTE:
Use a good quality water hose
with a standard quick fit
coupling.
NOTE:
This machine has the ability to
draw its own water, meaning
you can use water not under
pressure such as rainwater
collected in a water butt. See
page 16.
Summary of Contents for 7320202
Page 28: ......
