17
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Fill the supplied bottle with water.
6. Connect the hose from the bottle
to the self-suction valve shown.
7. Start the pressure washer See
“Starting your Pressure Washer” on
page 11.
8. Release the exhaust valve.
9. Turn the self-suction valve to the
on position.
10. Release the trigger lock and pull
the trigger.
11. When the water spray is at high
pressure, close the exhaust valve
and set the suction valve to the
OFF position.
NOTE:
If the water butt runs out of
water, the pressure washer will
need to be primed before use
by repeating steps 4-10.
Summary of Contents for 7320202
Page 28: ......
