5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY WARNINGS
WORK ENVIRONMENT
1. ALWAYS keep the work area clean and tidy.
2. ALWAYS dress appropriately - Do not wear loose clothing or jewellery. Tie
long hair out of the way.
3. ALWAYS keep children & visitors away - Do not let children handle the tools.
4. DO NOT operate the tool where there are flammable liquids or gases.
USE OF AIR POWERED TOOLS
1. ALWAYS stay alert and use common sense - do not operate air tools when
you are tired or under the influence of alcohol, drugs or medication.
2. ALWAYS wear eye protectors when using the tool - Eye protection must
provide protection from flying particles/objects from the front and the side.
Ear protectors should also be worn.
3. DO NOT overreach - Keep proper footing and balance at all times.
4. DO NOT use any type of bottled gas as a source of power for this tool.
5. DO NOT connect the air supply hose with your finger on the trigger.
6. DO NOT exceed the maximum pressure for the air tools 90 psi / 6.2 bar.
7. ALWAYS check hoses for leaks and ensure that all connections are secure.
8. ALWAYS keep the air supply hose away from heat, oil and sharp edges.
9. DO NOT use the tools for any purpose than that described in this manual.
10. DO NOT fit the tools to any stand or clamping device that may damage it.
11. ALWAYS disconnect from the air supply when:
• Performing maintenance
• The tools are not in use.
• The tools will be left unattended.
• Moving to another work area.
12. DO NOT use any tool if it is defective or operating abnormally.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY AND/OR DAMAGE TO PROPERTY.
Summary of Contents for 3110876
Page 32: ......
