10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ADJUSTING THE DIRECTION AND SPEED
THE FORWARD/REVERSE BUTTON SHOULD BE USED AS FOLLOWS:
1. For normal tightening, the impact wrench should be operated in the
forward (F) direction.
2. For loosening, the he impact wrench should be operated in the reverse (R)
direction.
NOTE:
Where the torque setting is critical, the final tightening of nuts or
bolts, must be by hand using a correctly calibrated torque
wrench.
ADJUSTING THE POWER
To adjust the power, set the air regulator to one of the 4 settings available.
1 (Low) - 4 (High)
USING THE IMPACT WRENCH
LOOSENING A WHEEL NUT/BOLT
1. Remove any wheel trim, before selecting the appropriate socket and
placing firmly on the square drive of the wrench.
WARNING: WAIT UNTIL THE WRENCH HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE SWITCH.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
Summary of Contents for 3110876
Page 32: ......
