Clarion VRX6570Rz, Owner'S Manual

Page: 39 / 56

280-7300-00
VRX6570Rz
47
P1 to P6, and press the ENT at the center of
the JOYSTICK
§
to call corresponding P.EQ
pattern. In this display, pressing the No. but-
ton in correspondence to the PRESET button
#
can also call the P.EQ pattern.
∗ After selecting P1 to P6 by operating the JOY-
STICK
§
, press the ENT at the center of the
JOYSTICK
§
for 2 seconds or longer to copy
the selected pattern to the USER pattern.
∗ Operate the JOYSTICK
§
rightward or left-
ward to select “ EDIT ”, and press the ENT at
the center of the JOYSTICK
§
to show P.EQ
adjusting display, in which the properties of
currently selected pattern can be adjusted.
∗ By pressing the BAND button
%
in BASIC pat-
tern selecting display or USER pattern selec-
tion/memory display you can switch between
the two patterns, BASIC and USER.
5. Operate the JOYSTICK
§
rightward or left-
ward to select “ MENU ”, and press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
Setting and storing P.EQ Properties/
Memory into USER Pattern
1. In the Basic adjustment display or in the User
setting display, press the A-M button
™
to
show the AUDIO-MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ EDIT ”, and press the ENT at
the center of the JOYSTICK
§
to show the
P.EQ adjusting display.
3. Select an item to be adjusted by operating
the JOYSTICK
§
rightward or leftward in the
P.EQ adjusting display.
4. Operate the JOYSTICK
§
upward or down-
ward to set each adjusting value.
∗ By pressing the PRESET buttons
#
once in
the P.EQ adjusting display, the setting value for
currently stored USER pattern is obtained.
5. After making adjustments to a desired pat-
tern by repeating the operations of items 3
and 4, operate the JOYSTICK
§
rightward
or leftward to move the cursor to “ RTN ”, and
press the ENT at the center of the JOYSTICK
§
to change over to the BASIC/USER pat-
tern selection/memory display.
6. Operate the JOYSTICK
§
rightward or left-
ward in the BASIC/USER pattern selection/
memory display to select USER memory P1
to P6 to be stored, and press the ENT at the
center of the JOYSTICK
§
for 2 seconds or
longer to store the adjusted P.EQ pattern to
the USER memory.
JOYSTICK
§
for 2 seconds or longer to store
the adjusted S.EQ pattern to the USER memory.
∗ By pressing the PRESET buttons
#
1 to 6 for
2 seconds or longer in the S.EQ adjusting dis-
play, the S.EQ pattern can be stored in the
USER memory.
7. To set a title of the stored USER pattern, op-
erate the JOYSTICK
§
rightward or leftward
to select “ TITLE ” and press the ENT at the
center of the JOYSTICK
§
to change into the
Title Input display.
∗
For title inputting method, refer to the section
“ Entering titles ”.
8. Operate the JOYSTICK
§
rightward or left-
ward to select “ MENU ” and press the ENT at
the center of the JOYSTICK
§
to change into
the AUDIO-MODE display.
Professional mode/P.EQ opera-
tions
P.EQ effect ON/OFF
∗ The factory default setting is “ ON ”.
1. Press the A-M button
™
to show the AUDIO-
MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ P.EQ ON/OFF ”, “ ON ” and
“ OFF ” items are displayed in the menu bar.
3. Operate the JOYSTICK
§
rightward or left-
ward to select “ ON ” or “ OFF ” and press the
ENT at the center of the JOYSTICK
§
to set
it.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “ P.EQ operations ” is not reflected in the
music source.
Calling P.EQ BASIC Pattern/USER
Pattern
1. Press the A-M button
™
to show the AUDIO-
MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ P.EQ MODE ”. “ BASIC ” and
“ USER ” items are displayed in the menu bar.
3. Operate the JOYSTICK
§
rightward or left-
ward to select the item thus called, and press
the ENT at the center of the JOYSTICK
§
to
show BASIC pattern selecting display or
USER pattern selection/memory display.
4. In the pattern selecting display, operate the
JOYSTICK
§
rightward or leftward to select
DSP operations
VRX6570Rz(En)(26-52) 06.3.6, 11:50 AM 47