Clarion VRX6570Rz, Owner'S Manual

Page: 37 / 56

280-7300-00
VRX6570Rz
45
8. Operate the JOYSTICK
§
rightward or left-
ward to select “ MENU ” and press the ENT at
the center of the JOYSTICK
§
to change into
the AUDIO-MODE display.
Easy mode/DSP operations
DSP effect ON/OFF
∗ The factory default setting is “ ON ”.
1. Press the A-M button
™
to show the AUDIO-
MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ DSP ON/OFF ”. “ ON ” and
“ OFF ” items are displayed in the menu bar.
3. Operate the JOYSTICK
§
rightward and left-
ward to select “ ON ” or “ OFF ” and press the
ENT at the center of the JOYSTICK
§
to set
it.
Note:
• If the DSP effect is set to OFF, the adjustment
made in “ DSP operations ” is not reflected in the
music source.
Calling DSP BASIC Pattern/USER
Pattern
1. Press the A-M button
™
to show the AUDIO-
MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ DSP MODE ”. “ BASIC 1 ”, “ BA-
SIC 2 ” and “ USER ” items are displayed in the
menu bar.
3. Operate the JOYSTICK
§
rightward or left-
ward to select the item thus called, and press
the ENT at the center of the JOYSTICK
§
to
show BASIC pattern selecting display or
USER pattern selection/memory display.
4. In the pattern selecting display, operate the
JOYSTICK
§
rightward or leftward to select
P1 to P6, and press the ENT at the center of
the JOYSTICK
§
to call corresponding DSP
mode. In this display, pressing the No. button
in correspondence to the PRESET button
#
can also call the DSP mode.
∗ After selecting P1 to P6 by operating the JOY-
STICK
§
, press the ENT at the center of the
JOYSTICK
§
for 2 seconds or longer to copy
the selected pattern to the USER pattern.
∗ Operate the JOYSTICK
§
rightward or left-
ward to select “ EDIT ”, and press the ENT at
the center of the JOYSTICK
§
to show DSP
adjusting display, in which the properties of cur-
rently selected pattern can be adjusted.
DSP operations
∗
By pressing the BAND button
%
in BASIC pat-
tern selecting display or USER pattern selec-
tion/memory display you can switch between
the two patterns, BASIC and USER.
5. Operate the JOYSTICK
§
rightward or left-
ward to select “ MENU ”, and press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
Setting and storing DSP Properties/
Memory into USER Pattern
1. Repeat the steps 1 to 3 of the previous proce-
dure (Calling DSP BASIC Pattern/USER Pat-
tern) to show BASIC pattern selecting display
or USER pattern selection/memory display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ EDIT ”, and press the ENT at
the center of the JOYSTICK
§
to show the
DSP adjusting display.
3. Select an item to be adjusted by operating the
JOYSTICK
§
rightward or leftward in the DSP
adjusting display.
“ EF ”
➜
EFFECT
“ DL ”
➜
DELAY
“ R.M ”
➜
REAR MIX
“ R.S ”
➜
ROOM SIZE
“ LV ”
➜
LIVENESS
“ R.T ”
➜
REVERB TIME
“ HI ”
➜
HIGH
4. Operate the JOYSTICK
§
upward or down-
ward to set each adjusting value.
∗ By pressing the PRESET button
#
once in the
DSP adjusting display, the setting value for cur-
rently stored USER pattern is obtained.
5. After making adjustments to a desired pattern
by repeating the operations of items 3 and 4,
operate the JOYSTICK
§
rightward or left-
ward to move the cursor to “ RTN ”, and press
the ENT at the center of the JOYSTICK
§
to
change over to the BASIC/USER pattern se-
lection/memory display.
6. Operate the JOYSTICK
§
rightward or left-
ward in the BASIC/USER pattern selection/
memory display to select USER memory P1 to
P6 to be stored, and press the ENT at the cen-
ter of the JOYSTICK
§
for 2 seconds or longer
to store the adjusted DSP pattern to the USER
memory.
∗ By pressing the PRESET button
#
1 to 6 for 2
seconds or longer in the DSP adjusting display, the
DSP pattern can be stored in the USER memory.
VRX6570Rz(En)(26-52) 06.3.6, 11:50 AM 45