54
VRX6570Rz
280-7300-00
1.
Do not open the case. There are no user
serviceable parts inside. If you drop anything
into the unit during installation, consult your
dealer or an authorized CLARION service
centre.
2.
Use a soft, dry cloth to clean the case. Never
use a rough cloth, thinner, benzine, or alco-
hol, etc. For tough dirt, apply a little cold or
warm water to a soft cloth and wipe off the
dirt gently.
1.
Prepare all articles necessary for installing
the main unit before starting.
2.
This model is used with the LCD panel slid
forwards (shell loading system). On some
types of cars, the LCD panel may touch the
dashboard or shift lever, in which case it can-
not be installed. Check that the set will not
hamper operation of the shift lever before
choosing the place of installation.(Figure 2)
3.
Install the unit within 30
°
of the horizontal
plane. (Figure 3)
4.
If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.
5.
Use the enclosed screws for installation.
Using other screws can cause damage. (Fig-
ure 4)
6.
The source unit has mounting screw holes
for NISSAN (N marks) and TOYOTA (T
marks) vehicles, and for Clarion installation
kit (C marks).
When you use a mounting kit sold separately,
affix the screws to the
●
marks above ac-
cording to the type of the vehicle. (Figure 5)
3.
GENERAL CAUTIONS
4.
CAUTIONS ON INSTALLATION
VRX6570Rz(En)Inst(p53-64)
06.3.6, 11:50 AM
54
