Clarion VRX6570Rz Owner'S Manual Download Page 27

Page: 27 / 56

280-7300-00

VRX6570Rz

Digital Radio/DAB Operations

Information select

This function allows selecting a type of INFOR-
MATION on INFORMATION interrupt mode. You
can set any of the 6 types of INFO below:

TRAFFIC, WARNING, NEWS INFO, WEATHER,
EVENTS, SP. EVENT

∗

This function is enabled only when the panel is
open.

1. Press the ADJ button

2. Operate the JOYSTICK

upward or down-

ward to select “

INFO SEL

”. Press the ENT at

the center of the JOYSTICK

to change into

the INFO selecting display.

3. Operate the JOYSTICK

upward or down-

ward to select a desired INFORMATION. “

”

and “

OFF

” items are displayed to the right.

4. Operate the JOYSTICK

rightward or left-

ward to select “

” and press the ENT at the

center of the JOYSTICK

to set it.

5. When the setting is finished, operate the JOY-

STICK

rightward or leftward to move the

cursor to the “

MENU

”. Then press the ENT at

the center of the JOYSTICK

to return to

the adjustment display.

PTY

This function enables you to listen to the selected
programmes type, irrespective of the function
mode.

∗

RDS interrupt does not function during AM radio
reception or in TV mode.

∗

DAB and RDS have the same PTY.

∗

You can select one PTY from DAB or RDS.

∗

PTY broadcast are not yet available in all coun-
tries.

∗

In INFO standby mode, INFO stations have prior-
ity over PTY stations.

∗

In TA standby mode, TP stations have priority over
PTY broadcasting station.

Selecting PTY

1. When you press the PTY button

, the unit

goes into PTY select mode.

2. Press any one of the PRESET buttons

select the desired PTY. Alternatively, when the
panel is closed, operate the SEARCH button

upward or downward to select a desired

PTY.

∗

Below are the factory default settings stored
for PRESET buttons

3. The PTY select mode is cancelled automatically

7 seconds after a PTY is selected.

●

Cancelling PTY standby mode

Press the PTY button

for 1 second or longer

to turn off “

PTY

” in the display and cancel the

PTY standby mode.

PTY seek

1. Press the PTY button

, the PTY select mode

is turned on.

2. Select a desired PTY.

3. Press the right or left side of SEARCH button

. If you press the right side, the unit seeks

a PTY broadcast moving up the frequencies;
if you press the left side, it seeks moving down
the frequencies.

∗

If no station with the selected PTY broadcast
can be received, the unit returns to PTY select
mode.

PTY preset memory

1. Press the PTY button

, the PTY select mode

is turned on.

2. Select a desired PTY.

3. If you press and hold any one of the PRESET

buttons

for 2 seconds or longer, the se-

lected PTY is stored into that preset channel
memory.

PTY item

ENGLISH

Contents

NEWS

News

INFO

Information

POP M

Pop music

SPORT

Sports

CLASSICS

Classics

M,O,R,M

Middle of the road music

Preset
number

VRX6570Rz(En)(26-52)

06.3.6, 11:50 AM

Summary of Contents for VRX6570Rz

























































Search results

Summary of Contents for VRX6570Rz

Reviews:

Related manuals for VRX6570Rz

Brands by name

Popular brands

Clarion VRX6570Rz, Owner'S Manual

Search results

Summary of Contents for VRX6570Rz

Reviews:

Related manuals for VRX6570Rz

Brands by name

Popular brands