Clarion VRX6570Rz Owner'S Manual Download Page 35

Page: 35 / 56

280-7300-00

VRX6570Rz

4. After adjustment (setting), operate the JOY-

STICK

rightward or leftward to move the

cursor to “

MENU

” and press the ENT at the

center of the JOYSTICK

to return to the

adjustment selection display.

5. Press the ADJ button

again to return to

the STANDARD display.

Selecting the easy mode or the
professional mode

∗

The factory default setting is “

EASY

”.

1. Press the ADJ button

to switch to the ad-

justment selection display.

2. Operate the JOYSTICK

upward or down-

ward to select “

DSP/EQ

”. “

EASY

” and “

PRO

”

items are displayed in the menu bar.

3. Operate the JOYSTICK

rightward or left-

ward to select a desired mode and press the
ENT at the center of the JOYSTICK

to set

the mode thus selected.

4. After setting, press the ADJ button

again

to return to the STANDARD display.

Woofer level adjustment

You can adjust an output sound level of
subwoofer.

1. Press the A-M button

™

to show the AUDIO-

MODE display.

2. Operate the JOYSTICK

upward or down-

ward to select “

W-VOL

” and press the ENT

at the center of the JOYSTICK

to show

the woofer level adjusting display.

3. Operate the JOYSTICK

upward or down-

ward to adjust the level (0 to 14).

4. After adjustment, operate the JOYSTICK

rightward or leftward to select “

MENU

” and

press the ENT at the center of the JOYSTICK

to return to the AUDIO-MODE display.

Easy mode/Setting the listening
position

Selection of listening position

1. Press the A-M button

™

to show the AUDIO-

MODE display.

2. Operate the JOYSTICK

upward or down-

ward to select “

POSITION

”. “

SELECT

" and

“

DETAIL

” are displayed in the menu bar.

3. Operate the JOYSTICK

rightward or left-

ward to select “

SELECT

”, and press the ENT

at the center of the JOYSTICK

to show

Position selecting display.

4. Operate the JOYSTICK

upward or down-

ward and press the ENT at the center of the
JOYSTICK

to select a desired position.

5. Operate the JOYSTICK

rightward or left-

ward to move the cursor to “

MENU

”, and press

the ENT at the center of the JOYSTICK

return to the AUDIO-MODE display.

Detail adjustment of listening
position

1. Press the A-M button

™

to show the AUDIO-

MODE display.

2. Operate the JOYSTICK

upward or down-

ward to select “

POSITION

”. “

SELECT

" and

“

DETAIL

” are displayed in the menu bar.

3. Operate the JOYSTICK

rightward or left-

ward to select “

DETAIL

”, and press the ENT

at the center of the JOYSTICK

to show

Position Detail adjusting display.

4. Operate the JOYSTICK

rightward or left-

ward to select “

BALANCE

” or “

FADER

”.

5. Operate the JOYSTICK

upward or down-

ward to make an adjustment.

6. Operate the JOYSTICK

rightward or left-

ward to move the cursor to “

MENU

”, and press

the ENT at the center of the JOYSTICK

return to the AUDIO-MODE display.

DSP operations

VRX6570Rz(En)(26-52)

06.3.6, 11:50 AM

Summary of Contents for VRX6570Rz

























































Search results

Summary of Contents for VRX6570Rz

Reviews:

Related manuals for VRX6570Rz

Brands by name

Popular brands

Clarion VRX6570Rz, Owner'S Manual

Search results

Summary of Contents for VRX6570Rz

Reviews:

Related manuals for VRX6570Rz

Brands by name

Popular brands