Clarion VRX6570Rz, Owner'S Manual

Page: 10 / 56

18
VRX6570Rz
280-7300-00
Basic Operations
When the panel is closed:
Each time you press the Z-EHCR button
9
, the
tone effect changes in the following order:
“ Z-EHCR 1 ”
➜
“ Z-EHCR 2 ”
➜
“ Z-EHCR 3 ”
➜
“ Z-EHCR OFF ”
➜
“ Z-EHCR 1 ”...
When the panel is open:
1. Press the A-M button
™
to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ Z-EHCR ”. Press the ENT at
the center of the JOYSTICK
§
to change into
the Z-enhancer selecting display.
3. Operate the JOYSTICK
§
upward or down-
ward to select out of:
“ TYPE 1” (Z-Enhancer 1) “ TYPE 2 ” (Z-En-
hancer 2) “ TYPE 3 ” (Z-Enhancer 3)
“ OFF ” (Z-Enhancer off),
and press the ENT at the center of the JOY-
STICK
§
to set a desired Z-enhancer.
4. When the setting is finished, operate the JOY-
STICK
§
rightward or leftward to move the
cursor to the “ MENU ”. Then press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
∗ To return from the AUDIO-MODE display to the
STANDARD display, press the A-M button
™
once again.
Adjusting the Z-enhancer
Note:
• This function is enabled only when the panel is
open.
1. Press the A-M button
™
to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ Z-EH LVL ” level. Press the ENT
at the center of the JOYSTICK
§
to change
into the Z-enhancer adjusting display.
3. Operate the JOYSTICK
§
upward or down-
ward to adjust the Z-enhancer level.
∗
When Z-Enhancer 1 is selected, you can adjust
the bass in the range of ± 2.
∗ When Z-Enhancer 2 is selected, you can adjust
the treble in the range of ± 2.
∗ When Z-Enhancer 3 is selected, you can adjust
the bass and treble in the range of ± 2.
4. When the adjustment is finished, operate the
JOYSTICK
§
rightward or leftward to move
the cursor to “ MENU ”. Then press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
Adjusting the bass and treble
Notes:
• This function is enabled only when the panel is
open.
• This function can be adjusted only when the Z-
enhancer is OFF.
1. Press the A-M button
™
to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ BAS/TRE ”. Then press the
ENT at the center of the JOYSTICK
§
to
change into the BASS/TREBLE adjusting dis-
play.
3. Operate the JOYSTICK
§
rightward or left-
ward to adjust the “ BASS ” or “ TREBLE ”.
4. Operate the JOYSTICK
§
upward or down-
ward to adjust a level (adjustment range: from
-6 to 6).
5. When the adjustment is finished, operate the
JOYSTICK
§
rightward or leftward to move
the cursor to “ MENU ”. Then press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
Adjusting the balance and fader
Note:
• This function is enabled only when the panel is
open.
1. Press the A-M button
™
to change into the
AUDIO-MODE display.
2. Operate the JOYSTICK
§
upward or down-
ward to select “ BAL/FAD ”. Then press the
ENT at the center of the JOYSTICK
§
to
change into the BAL/FAD adjusting display.
3. Operate the JOYSTICK
§
rightward or left-
ward to select “ BALANCE ” or “ FADER ”.
4. Operate the JOYSTICK
§
upward or down-
ward to make an adjustment.
Adjusting range of the balance: L13 to R13
Adjusting range of the fader: front 12 / rear 12
5. When the adjustment is finished, operate the
JOYSTICK
§
rightward or leftward to move
the cursor to “ MENU ”. Then press the ENT at
the center of the JOYSTICK
§
to return to
the AUDIO-MODE display.
VRX6570Rz(En)(p9-25) 06.3.6, 11:50 AM 18