10
NX501A
English
Owner’
s Manual
4. PANEL CONTROLS
NX501A Functions of Buttons
Note:
Be sure to read this chapter while referring to front
diagram “PANEL CONTROLS”.
[PWR/VOL]
Knob
• Press this key to power on the system in power off
mode.
When the power is already on, it moves to the
Navigation mode. If Navigation mode is displayed it
moves to the Navigation menu.
• Keep pressing this key more than 2 second to turn
off the system when system is in power on mode.
• Rotate the knob to increase or decrease the volume.
[NAVI/AV]
Button
• Press this button to enter navigation mode; press
again to return current source.
• Press and hold this button for 3 seconds to display
the brightness setting panel.
[ ]
Eject
• Press to eject disc from unit.
[MENU]
Button
• Press this button to display main menu, press again
to return current source.
• Press and hold this button for 3 seconds to turn off
the monitor. Press any place of the screen to turn on
the monitor again.
[RESET]
Button
• Press this button to hardware reset the unit.
Note:
When the
[RESET]
button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[microSD]
• Insert a microSD in this.
Note:
The microSD card is only for navigation. Please
don’t remove it, otherwise, the navigation function will
be disabled.
[AUX IN]
AUX 1 Connector.
[Microphone]
• Internal microphone for use during Bluetooth phone
calls. Sensitivity can be adjusted from the Settings
menu.
[IR]
SENSOR
• Receiver for the remote control unit (operating
range: 30 degree in all directions).
[ ]
[Microphone]
[MENU]
[NAVI/AV]
[PWR/VOL]
[RESET]
[microSD]
[AUX IN]
[IR]
NX501A_Usermanual_EN-CM-110414.indd 10
2011-4-14 14:19:54
