Your Hipot tester
61
On Test Failure:
(Two options)
•
Failure
Menu
This gives user the option of having a menu for a failure within an
automatic test sequence. The menu will give user the option of retrying
a failed test (Restart Test), revise Product detail (Restart Product), end
the test (End Product) and aborting the test on the product (Abort
Product).
•
End
Product
This will just end the test sequence immediately once Failure is
detected.
Test Type :
(Three options)
•
Any
This gives user the option of selecting from a test setting list each time
before any test is instigated.
•
Barcode
only
This option allows user to scan in a Barcode representation of any test
setting using a Barcode scanner.
•
Fixed
testName (selected from test setting list e.g. Test 123)
This option allows user to keep to only one test setting for every test.
To change to a different test setting, select Setup & System
Configuration and then highlight testName, press Green. Select a new
testName from test setting list.
Otherwise select one of the two options above for more flexibility.
Comments
:
•
Never
This will not allow any comments recording after each test.
•
Always
This will always allow user to enter comments after each test.
•
On
Pass
This will allow user to enter comments only when a test has Passed.
•
On
Failure
This will allow user to enter comments only when a test has Failed.
After Test:
•
Menu
(Options)
This allows user to have the options to select New Test, Review test
results, Download test results or return to Main Menu after each
test.
•
New
Test
This option allows user to progress to the ‘Next’ (new) product test.
