clare HAL101 Operating Manual Download Page 63

Page: 63 / 104

Your Hipot tester

Startup Mode

Use the encoder to highlight a test mode on startup and press Green to
select the desired option.

Main Menu (Automatic Mode)

The Tester will start up in Automatic Mode, with the Tester displaying
the Main Menu.

Manual Mode

The Tester will start up in Manual Mode, with the Tester displaying the
Manual Test Selection Menu.

Beep on Key Press

Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If

Yes

is selected this option will beep each time a

key is pressed.

Beep on Tests

Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If

Yes

is selected this option will beep whenever the

High Voltage Test in progress icon is displayed or when a test has
failed.

Beep on Barcodes

Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If

Yes

is selected this option will beep whenever a

barcode has been received.

Beep on Warning

Use the encoder to highlight a buzzer option and press Green to select
the Yes/No option. If

Yes

is selected this option will beep whenever a

warning message is displayed to alert user.

Summary of Contents for HAL101









































































































Search results

Summary of Contents for HAL101

Reviews:

Related manuals for HAL101

Brands by name

Popular brands

clare HAL101, Operating Manual

Search results

Summary of Contents for HAL101

Reviews:

Related manuals for HAL101

Brands by name

Popular brands