6
We have organized the parts as they come out of the box for easier identification during assembly. Before you begin assembly,
group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly and it will also help
you become familiar with each part.
If you find any parts missing or damaged, please contact us as soon as possible, using the Customer Service
Information on page # 3.
A complete replacement parts list can be found on page # 37.
SECTION 4: KIT CONTENTS
AIRFRAME ASSEMBLIES
❑
(1) Fuselage
❑
(1) Center Wing Panel
❑
(1) Left Wing Tip Panel w/Aileron
❑
(1) Right Wing Tip Panel w/Aileron
❑
(1) Horizontal Stabilizer w/Elevator
❑
(1) Rudder
❑
(1) 6-1/8" Threaded Wire w/Z-Bend
❑
(1) Nylon Control Horn w/Backplate
❑
(1) Nylon Clevis
❑
(2) M2 x 12mm Machine Screws
❑
(1) C/A-Style Hinge
RUDDER CONTROL SYSTEM
LANDING GEAR ASSEMBLY
❑
(1) Steel Axle
❑
(1) Aluminum Tube
❑
(2) Main Gear Wheels
❑
(2) Nylon Spacers
❑
(2) Wheel Collars
❑
(2) M3 x 6mm Machine Screws
❑
(2) Rubber Bands
AILERON CONTROL SYSTEM
❑
(2) 3-3/8" Threaded Wires w/Z-Bends
❑
(2) Nylon Control Horns
❑
(2) Nylon Clevises
❑
(4) M2 x 10mm Wood Screws
❑
(8) Nylon Steel-Pinned Hinges
ELEVATOR CONTROL SYSTEM
❑
(1) 5-1/2" Threaded Wire w/Z-Bend
❑
(1) Nylon Control Horn w/Backplate
❑
(1) Nylon Clevis
❑
(2) M2 x 12mm Machine Screws
❑
(6) C/A-Style Hinges
ENGINE MOUNT ASSEMBLY
❑
(2) Engine Mounting Beams
❑
(4) M3 x 18mm Machine Screws
❑
(4) M3 x 25mm Socket-Cap Screws
❑
(4) M3 Lock Nuts
❑
(4) M3 Blind Nuts
❑
(12) M3 Flat Washers
❑
(1) Prebent Tail Wheel Wire w/Nylon Bearing
❑
(1) Tail Wheel
❑
(1) Nylon Spacer
❑
(1) Wheel Collar
❑
(1) M3 x 5mm Machine Screw
TAIL WHEEL ASSEMBLY
❑
(1) 11-3/4" Plain Wire w/Z-Bend
❑
(1) Adjustable Pushrod Connector w/Machine Screw & Nut
THROTTLE CONTROL SYSTEM
❑
(1) 85cc Fuel Tank
❑
(1) Large Diameter Metal Plate
❑
(1) Small Diameter Metal Plate
❑
(1) Neck-Reinforcement Ring
❑
(1) Rubber Stopper
❑
(1) Fuel Pick-Up "Clunk"
❑
(1) M3 x 20mm Machine Screw
❑
(1) Silicone Fuel Tubing
❑
(3) Aluminum Tubing
FUEL TANK ASSEMBLY
MISCELLANEOUS FUSELAGE PARTS
❑
(2) Hardwood Dowels
❑
(2) Plywood Mounting Plates (Optional)
❑
(1) Plastic Windscreen
❑
(5) M2 x 5mm Wood Screws
❑
(2) M2 x 10mm Flange-Head Wood Screws
❑
(1) Clear Vinyl Tubing
❑
(1) Decal Set
MISCELLANEOUS WING PARTS
❑
(1) Front Wing Deck
❑
(1) Rear Wing Deck
❑
(4) Plywood Rubber Band Doublers
OPTIONAL ELECTRIC MOTOR MOUNT ASSEMBLY
❑
(4) Motor Mounting Straps
❑
(4) M3 x 12mm Wood Screws
❑
(4) M3 Flat Washers
