UK
Use
RUN TIME: how much to water
Each solenoid valve
(LINE)
can be set with a relative watering duration
(RUN TIME)
expressed in minutes.
The sum of the Run Times on the enabled Lines will determine the
WATER-
ING CYCLE
.
If an RF Unit shall be equipped with multiple lines, solenoid valve opening
during a watering cycle is sequential (ex. from Line 1 to Line 4).
Watering programme B
1
5
Run
time 1
Run
time 2
Run
time 3
Run
time 4
Run
time 1
Run
time 2
Run
time 3
Run
time 4
10 5 15
2
WATERING CYCLE PROG A
WATERING CYCLE PROG B
RUN TIME
RUN TIME
LINES
3
4
60
40 OFF! 25
Watering programme A
If one of the lines is not going to be used in a watering cycle, the
Run Time for that line can simply be set to OFF.
54
02_Telecontroller_2U_PROFESSIONAL_EN.indd 54
14/01/16 10:47