UK
RF RAIN SENSOR
• From the page RAIN SENSOR , press the button
-> this calls up
activation/deactivation of the RF Rain Sensor.
• Pressing the button, the option can be
toggled between ‘
’ (sensor activated) and ‘
’ (sensor deactivated).
• Confirmby pressing the
button.
Checking the Rain Sensor status
Information on the status of the RF Rain Sensor will reflect the
situation at the moment of the latest communication between the
remote control and the RF Unit. To establish the current ‘rain’ or ‘dry’
status of the RF Rain Sensor, proceed as follows:
• Press the
button repeatedly to bring up the selection page of the
RF Unit interlocked to the RF Rain Sensor.
• Standing within 10 metres of the RF Unit, press the
RF
button
on the remote control; the display will start to blink, and after a few
seconds the
RF
symbol will light up momentarily.
• Now check to see whether the symbol appears in the display, as
indicated below.
Programming
72
02_Telecontroller_2U_PROFESSIONAL_EN.indd 72
14/01/16 10:48
