UK
PROG
EXIT
LINE
PROG
OK
OK
• After 5 minutes have elapsed, the solenoid valve closes and the flow of
water is shut off. To stop watering before the five minutes have elapsed,
press the
button; the message ‘OFF’ will appear in the display.
Quitting the test/manual watering page
• Bring up the page that shows the message TEST accompanied by the
OK
and
EXIT
symbols, both blinking.
• Press the
button to exit TEST/manual mode.
• Pressing the
button, the RF Unit selection page reappears.
When TEST mode is accessed, any programmed watering cycles in
progress will be interrupted temporarily, then resume automatically.
Programming
75
02_Telecontroller_2U_PROFESSIONAL_EN.indd 75
14/01/16 10:48
