Citronix ci5000 Series Operation Manual Download

Page: 21 / 133

ci5000 Series Printer Operation Guide

Version 1.0

1-9

Ink System

墨水系统

The ink system keeps the ink optimally conditioned for reliable printing and cleaning/flushing of the
printhead.

墨水系统保证墨水的最佳状态，保证稳定可靠地喷印和清洗

冲洗打印头

Fluids are added with the assistance of the

Reader. This ensures optimal printer performance

by checking the fluids are valid, compatible and in date.

耗材添加通过

“放心加”读写器辅助。

RFID

通过检查耗材是否正确，匹配和保质期内，保证喷码机运行状态最佳

The

module and air filter are the only two items that require periodic servicing.

“快易护”

模块和空气过滤网是仅有的两个需要定期更换的部件

The ink and make up tanks are topped off using their respective fill ports located on the top of the printer.
The fill ports are keyed to match the ink and make up bottles.

墨水和溶剂通过各自位于机箱顶部的注入口

添加。注入口带有卡销分别对应墨水和溶剂瓶。

Air Filter

空气过滤器

Summary of Contents for ci5000 Series






































































































































Search results

Summary of Contents for ci5000 Series

Reviews:

Related manuals for ci5000 Series

Brands by name

Popular brands

Citronix ci5000 Series, Operation Manual

Search results

Summary of Contents for ci5000 Series

Reviews:

Related manuals for ci5000 Series

Brands by name

Popular brands