Citronix ci5000 Series, Operation Manual

Page: 113 / 133

ci5000 Series Printer Operation Guide
Version 1.0
5-8
Error
故障 故障 故障 故障
This error will appear in 4 stages to allow enough scheduling time to allow the printer to be shut down for
replacement so that this does not interfere with normal production runs.
在整个维护周期中机器将分
4
个
阶段提示过滤器更换时间，以保证不影响机器的正常运行
They are as follows:
它们的过程如下
1. The first error/warning will appear when the Service Module reaches 300 hours left before
expiring. This error/warning will reappear once a day. Usually at startup or in case of a 24/7
operation, the same time each day that it initially appeared.
第一阶段信息提示出现在过滤器剩余
时间为
300
个小时的时候。这个阶段的提示将每天显示一次。通常在开机的时候或
24/7
（每周运
行
24
小时）运行的时候，每天在第一次信息提示的同一时间提示。
2. The second error/warning will appear at 150 hours left. This error/warning will reappear once and
hour until the next stage is reached.
第二阶段提示出现在剩余时间为
150
个小时的时候。这各阶
段的提示将每小时显示一次，直到条件满足下一阶段提示。
3. The third error/warning will appear when there is 50hours and less left. This error/warning will
reappear every 5 minutes until zero (0) hours are reached.
第三阶段提示出现在剩余时间小于等于
50
个小时。这个阶段的提示将每
5
分钟提示一次，直到剩余时间为
0
。
4. This is the final error/warning and will appear when the module hours have reached zero (0). At
this time the printer will perform a controlled shutdown and will not run until the Service Module is
replaced and a new tag scanned resetting the hours.
当过滤器剩余时间为
0
的时候，这是最后的
警告并且将一直显示。在这个时候，喷码机将被强制执行关机并被锁住，直到更换新的“快易护”
模块并读取一次信息，复位使用时间。