2-28
T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 2 Installing the T1000
Step 1
Isolate the power supply to ensure that the power supply cables are not energized. Use an
appropriate lockout/tagout procedure to ensure that the power supply cables are not
accidentally energized during the installation procedure.
Step 2
Connect the wires to the appropriate terminals. Torque the #4-40 wiring-terminal screws to
0.5 to 0.6 newton-meters (4.4 to 5.1 inch-pounds). Torque the #8-32 ground lug retention
nut on the rear panel to 2.0 to 2.4 newton-meters (17 to 20 inch-pounds)
Turning On DC Power to the System
The T1000 unit has a power switch located on the rear panel. See Figure 2-9 above. When
properly energized, the LCD panel on the front of the T1000 will illuminate.
Turning Off DC Power to the System
Attention:
Only trained service personnel are authorized to make the connections to and
disconnections from the DC power source. Bytemobile service technicians are
not certified or authorized to install or remove the DC power cables. The
customer is responsible for ensuring that only trained service personnel install
or remove the DC power cables.
If you need to shut down the T1000 to move it or to perform maintenance, you must make
sure all the processes in the system are shut down properly.
Follow the steps below to power off the system:
Step 1
Log on to the system CLI or GUI and access the
shutdown
function to power-off the T1000.
All processes are shut down gracefully before power to the T1000 is switched off.
Step 2
Turn off DC power to the circuits that are providing power to the T1000. Isolate the power
supply to ensure that the power supply cables are not energized. Use an appropriate
lockout/tagout procedure to ensure that the power supply cables are not accidentally
energized during the disconnect procedure.
Step 3
Disconnect the power cables from the rear of the T1000. See Figure 2-9.
Summary of Contents for ByteMobile T1010
Page 10: ...x T Series Traffic Director Installation Configuration and Administration Guide...
Page 14: ...Contents xiv T Series Traffic Director Installation Configuration and Administration Guide...
Page 172: ...Index Index 4 T Series Traffic Director Installation Configuration and Administration Guide...
