2-20
T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 2 Installing the T1000
•
Review the electrostatic discharge (ESD) guidelines in
•
Review the AC power specifications in
“T1000 Hardware Specifications and
•
The T1000 unit has a power switch on the rear of the panel. Review the instructions
in
“Turning On AC Power to the System”
on page 2-22 for additional precautions related to enabling and disabling
power.
•
The T1000 automatically shuts down if the total power consumption exceeds the
total power supply output capacity.
Caution
Statement 8:
Never remove the cover on a power supply or any part that has the
following label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts
inside these components. If you suspect a problem with one of these parts,
contact a service technician.
Caution:
Statement 5:
The power control button on the T1000 does not turn off the electrical current
supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are
disconnected from the power source.
1
2
Summary of Contents for ByteMobile T1010
Page 10: ...x T Series Traffic Director Installation Configuration and Administration Guide...
Page 14: ...Contents xiv T Series Traffic Director Installation Configuration and Administration Guide...
Page 172: ...Index Index 4 T Series Traffic Director Installation Configuration and Administration Guide...
