1-12
T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 1 Introduction
The LCD has a neon backlight. Normally, the backlight glows steadily. When there is an
active alert, it blinks rapidly. If the alert information exceeds the LCD screen size, the
backlight blinks at the beginning of each display screen. When the T1000 shuts down, the
backlight remains on for one minute and then automatically turns off.
There are nine types of display screens on the LCD display. The first two screens in the
following list, the booting screen and the startup screen, appear when your T1000 is starting
up. The other screens, except the out-of-service screen, can appear while the T1000 is
operating. They show configuration information, alerts, HTTP information, network traffic
information, CPU load information, and port information for your T1000.
Booting Screen
The booting screen is displayed immediately after the T1000 is turned on. The first line
displays the hardware platform, as shown in the following figure.
Figure 1-9
LCD Booting Screen
To view the model number from the command line, type
show license
. Scroll to the end of
the command output to view the model number.
Startup Screen
The startup screen is displayed for a few seconds after the T1000 successfully begins
operation. The first line displays the hardware platform, and the second line displays the
software version and build number, as shown in the following figure.
Figure 1-10 LCD Startup Screen
Out-of-Service Screen
The out-of-service screen is displayed when the T1000 has undergone a controlled
shutdown, as shown in the following figure.
Summary of Contents for ByteMobile T1010
Page 10: ...x T Series Traffic Director Installation Configuration and Administration Guide...
Page 14: ...Contents xiv T Series Traffic Director Installation Configuration and Administration Guide...
Page 172: ...Index Index 4 T Series Traffic Director Installation Configuration and Administration Guide...
