Citrix ADC MPX 10500 Manual Download Page 74

Page: 74 / 176

Citrix ADC MPX

Citrix ADC MPX 25xxx-40G

October 25, 2019

The Citrix ADC MPX 25100/25160/25200 40G are 2U appliances. Each model has two 10-core proces-

sors, 256 GB of memory, four 40G QSFP+ ports, and sixteen 10G SFP+ ports (4x40G QSFP+ 16x10G
SFP+).

The following figure shows the front panel of the MPX 25100/MPX 25160/25200 40G appliances.

Figure 1. Citrix ADC MPX 25100 40G, MPX 25160 40G, MPX 25200 40G, front panel

• RS232 serial Console Port.
• 10/100Base-T copper Ethernet Port (RJ45), also called the LOM port. You can use this port to

remotely monitor and manage the appliance independently of the Citrix ADC software.

• Network Ports. Four 40G QSFP+ ports and sixteen 10G SFP+ ports (4x40G QSFP+, 4x10G SFP+,

4X10G Base-T).

Note the following points regarding the network ports on MPX 25100 40G and MPX 25160 40G appli-
ances:

• 10G ports do not support 1G copper or 1G fiber transceivers.
• 40G ports do not support 10G and 1G transceivers.

Summary of Contents for ADC MPX 10500













































































































































































Search results

Summary of Contents for ADC MPX 10500

Reviews:

Brands by name

Popular brands

Citrix ADC MPX 10500, Manual

Search results

Summary of Contents for ADC MPX 10500

Reviews:

Brands by name

Popular brands