Citrix ADC MPX
For information on the software releases supported on the Citrix ADC hardware platforms, see
Hardware-Software Release Matrix
The following figure shows the front panel of the MPX 89xx series appliances.
Figure 1. Citrix ADC MPX 89xx, front panel
The Citrix ADC MPX 89xx series appliances have the following ports:
• RS232 serial Console Port.
• One 10/100/1000Base-T RJ45 copper Ethernet LOM Port. Use this port to remotely monitor and
manage the appliance independently of the Citrix ADC software.
• One 10/100/1000Base-T RJ45 copper Ethernet Management Port, numbered 0/1. This port is
used to connect directly to the appliance for Citrix ADC administration functions.
• Six 10/100/1000Base-T RJ45 copper Ethernet Ports, numbered 1/1 to 1/6 from left to right.
• Four 10G/1G SFP+ Ethernet Ports, numbered 10/1 to 10/4 from left to right.
The following table indicates the LED status for the Management and LOM ports:
LED Color
LED Indicates
OFF
No connection or 10 Mbps speed
Flashing YELLOW
Active
Flashing GREEN
100 Mbps speed
AMBER
1 Gbps speed
The following figure shows the back panel of the MPX 89xx appliance.
Figure 2. Citrix ADC MPX 89xx, back panel
© 1999-2019 Citrix Systems, Inc. All rights reserved.
37
