Citrix ADC MPX 10500 Manual Download Page 58

Page: 58 / 176

Citrix ADC MPX

The Citrix ADC MPX 15000-50G appliance is a 2U appliance. This platform has two 8-core processors

and 128 GB of memory. The MPX 15000-50G appliance provides a total of 12 network ports:

• Eight 10G SFP+ Ethernet Ports
• Four 50G Ethernet Ports

For information about the software releases supported on the Citrix ADC hardware platforms, see

Cit-

rix ADC MPX hardware software compatibility matrix

The following figure shows the front panel of the Citrix ADC MPX 15000-50G appliance.

Figure 1. Citrix ADC MPX 15000-50G, front panel

The Citrix ADC MPX 15000-50G appliances have the following ports:

• RS232 serial console port.
• One 10/100/1000Base-T RJ45 copper Ethernet LOM port. Use this port to remotely monitor and

manage the appliance independently of the Citrix ADC software.

• Two 10/100/1000Base-T RJ45 copper Ethernet Management ports, numbered 0/1 and 0/2. This

port is used to connect directly to the appliance for Citrix ADC administration functions.

• Eight 10G SFP+ Ethernet ports, numbered 10/1 to 10/8.
• Four 50G ports, numbered 50/1 to 50/4.

The following figure shows the back panel of the Citrix ADC MPX 15000-50G appliance.

Figure 2. Citrix ADC MPX 15000-50G, back panel

Summary of Contents for ADC MPX 10500













































































































































































Search results

Summary of Contents for ADC MPX 10500

Reviews:

Brands by name

Popular brands

Citrix ADC MPX 10500, Manual

Search results

Summary of Contents for ADC MPX 10500

Reviews:

Brands by name

Popular brands